PB010036 Bake / Broil Thermostat
Common two lead thermostat. Used on any non DSI ignition system
The oven thermostat maintains the correct oven
Temperatures in the bake and broil operations.
In bake operation, thermostat contacts close completing
The bake circuit through the bake ignitor, and bake gas
Valve to neutral. In broil operation, thermostat at contacts
The broil circuit through the broil ignitor and broil gas
Valve to neutral. The thermostat contacts can be checked for
By using a continuity tester or an ohmmeter set to the
Low ohms range. Power to the oven must be turned off
And the thermostat wiring removed when checking the
continuity. Access to the thermostat
Contacts can be made by removing the control panel.
Replace the thermostat if the switch contacts are
If you need help determining if this is the correct Viking Part for your Viking Appliance, just email us at firstname.lastname@example.org or call one of our Viking Part Pros at 888 988 4546.