AVP002702-000 Start Button sub from 002702-000 This is a 3D printed replacement part for the original button. Color may differ, but will function the same as original.
Attaches to switch PE050225 https://www.allvikingparts.com/PE050225_Power_Swi...
OEM part no longer available? Don't worry! AllVikingParts.com has you covered. This part has been meticulously reverse engineered by our team of experts to produce a functional part as close to the original as possible. This part is 100% made in the U.S.A. If you need help determining if this is the correct Viking Part for your Viking Appliance, just email us at [email protected] or call one of our Viking Part Pros at 888 988 4546.
This part is made from a high-quality acrylic resin.
After production, these are stored in a warehouse. During storage and shipping
however, the plastic can become cold and rigid which increases the risk of
breaking during install.
It is advised that you get your new part up
to room temperature before installing.
This can be accomplished by..
1.)
Leaving
the part in your house for 24 hours.
or
2.)
Soak
the new part in hot water prior to installation. This will soften the
part and make it pliable for install.
Fill a coffee mug with hot tap water and place the
part in the mug for a few minutes. DO
NOT USE BOILING HOT WATER.
Make sure to dry the part completely before installing
The resin is graded to withstand temperatures up to
171° F
Disclaimer:
Allvikingparts.com is not responsible for any damaged sustained from
overheating your new part.
