WARMER SHELF PRO 30" S/S

H BURNER, BRASS - PRO, REV J

ELECTRODE, PROSEAR 15" Lynx Grill Replacement Electrode w 15-in Wire

SPIT ROD, PRO 54" FULL Rotisserie Spit Rod for Lynx Professional Grills

FORK, ROTIS Rotisserie Spit Fork for Lynx Professional and Premier Grills

End clips for the Lynx briquette trays

SPIT ROD, PRO 54" 9/16" Rotisserie Spit Rod for Lynx Professional Grills

ELECTRODE, PROSEAR 34"

BATTERY HOLDER ASS'Y W/DIODE

PRO SEAR MAIN BURNER sub from 31183, 31885

HALOGEN BULB, REPLACEMENT, 10W Halogen 10 Watt Light Bulb for Lynx Professional, Sedona by Lynx and Lynx Premier Grills

WARMING RACK, 54", PRO

Lynx J, K, L, M Series (2007) Pro 54 Inch Gas Grill Replacement Warming Shelf (Warming Rack)

SPIT ROD, 54" Rotisserie Spit Rod for Lynx Professional Grills

SCREEN, REPLACE PROSEAR, REV B For Lynx 30, 42, 54 Grills 2007-2011

BURNER, PROSEAR PRO Lynx Grill Replacement Pro Sear Infra Red Burner for 30, 42, 54-in

COLLECTOR BOX, PRO 2010

THERMOMETER, WATER SEALED Hood Thermometer for Lynx Professional and Sedona by Lynx Grills (2012-2014)

GRATE PRO 30/42/54 W/CROSSBAR Sub from 30018

COLLECTOR BOX, CERAMIC

ROTIS MOTOR ASSEMBLY Rotisserie Motor for 27"/30"/36"/42"/54" Lynx Professional Grills

DUAL LIGHT ASSEMBLY sub from 80306. This assembly is for the internal lights inside the hood.

BRIQUETTE TRAY, 42/54 NARROW

Lynx Gas Grill (2002-2004, 2005 & 2006 Models 42, 54) Replacement Stainless Steel Briquette Tray CENTER

Does NOT Include Clips or Briquettes, Sold Individually

NARROW TRAY

Approx 10 1/2 x 19 1/4

BRIQUETTE TRAY, 30/42/54 WIDE

BRIQUETTE KIT Ceramic Briquettes Use 1 Box Per Briquette Tray, 35 per box

IGNITION KIT L54PSR/L54PSFR

The Lynx ignition Kit includes : module, battery, igniter button, igniter wire

KNOB, SS ROTIS W/CLIPS SUB FROM 90166

KNOB, SS BURNER W/CLIPS sub from 31773, 11073

ELECTRODE KIT COMPLETE 54

Complete Hot Surface Electrode kit for Lynx grills below.

Includes 2 - 33052 and 4 - 33051 as well as all wires

HOT SURFACE RETROFIT KIT 54

This kit fits Lynx 54-in Model

Lynx is no longer servicing older ignitions in the J & K series. Grills must be upgraded to this new system.

Ignitor Kit Components :

A. Main Ignitor and Shields - There Are 2 3 or 4 Depending On The Kit You Are Installing
B. ProSear Burner Shield - One Is Pre-assembled and Provided In Each Kit
C. Long Hot Surface Ignitors For Each Cast Burner - There Are 2 3 or 4 Depending On The Kit You Are Installing
D. Short Hot Surface Ignitors For the ProSear and Rotisserie Burners - There Are 2 or 3 Depending On The Kit You Are Installing. Note : One Of These Ignitors Will Have Different Wire Connectors - This Ignitor Is For Attachment To Item B For Use With The Sear Burner
E. Wire Assemblies To Replace All The Connectors To Each Ignitor
F. Transformer With Mounting Brackets and A Y-Connector

THERMOMETER REPLACEMENT KIT Hood Thermometer for Lynx Professional and Lynx Premier Grills (2002-2011) sub from 31200

BRIQ TRAY ASSEMBLY, 42/54 NARROW sub from 80365

Lynx Gas Grill (2002-2004, 2005 & 2006 Models 42, 54) Replacement Stainless Steel CENTER Briquette Tray ASSEMBLY

Sold Individually

Series E - Q

Includes : Briquettes, Tray, Clips

BRIQ TRAY ASSY, 30/42/54 WIDE sub from 80364 Assembly kit includes tray and briquettes, clips. If you would like just a tray, you need part 80645

PROLPK 30"/42"/54" Grills NG to LP Conv Kit Comaptible for grills MADE BEFORE 2007

PROLPK-1 Conv N Kit 30/42/54 NG to LP MODELS MADE 2007 TO 2011

LSTLP Sliding tank tray Fits 30, 42 & 54 free standing grills carts only

Sliding Tank tray, to be assembled to LP cart units 30”, 42” and 54”

PRONGK-2 30"/42"/54" Grills LP to NG Conv Kit Comaptible for grills MADE 2012 AND AFTER

PROLPK-2 Conv N Kit 30/42/54 NG to LP MODELS MADE 2012 AND AFTER

PRONGK-1 30"/42"/54" Grills LP to NG Conv Kit Comaptible for grills sub from PRONGK MADE 2007 TO 2011